BRODIT 721295 Active holder with USB-cable and cig-plug adapter Adjustable holder with Type C connector. Fits for devices with skin, with the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. With USB-cable + cig-plug adapter with 2 USB ports: QC

Active holder with USB-cable and cig-plug adapter

Adjustable holder with Type C connector. Fits for devices with skin, with the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. With USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt.

• Samsung Galaxy S22 Ultra 5G (SM-S908B/SM-S908B/DS)

Item no 721295

INFORMATIONSPECIFICATIONFITS FORINSTRUCTIONS

With your mobile in a holder while driving you will always have it within easy sight and reach! And with an active holder you always have a charged battery when leaving the car. Neat, discreet and convenient! With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.

The adjustable holder fits for devices with USB type C connector, with skin, with the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product. Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto a ProClip mounting platform.

Cig-plug adapter with extra USB-A (female) port

A cig-plug adapter for your vehicle's 12V outlet. Enables you to charge two devices at the same time. For example you can use a Brodit holder and at the same time connect an additional USB-A cable (not included) for charging of a second device. Qualcomm Quick Charge 3.0 + 5V/2.4A. Fast charging is device dependent.

Charging specifications:

- Output Connector Type: Dual USB Type-A Female.

- Output Voltage: 5V, 9V, 12V(Nominal)

- Output Current:

- USB Port 1: 4.9V ~ 5.25V 2.4A (White port, recommended for Apple)

- USB Port 2: QC3.0. 3.6V ~ 6V/3A 6.2-9V/2A 9.2-12V/1.5A (Green port, recommended for Android etc)

- Output Voltage Ripple: 300mV pk-pk at Max Load

- Input Voltage Range: DC 12--24V DC, Input can handle 40V Load dump translent events

- Input Current: 3.0 A DC Max

- Input Current with No device attached: 0.005A

- DC-DC Conversion Efficiency: Over 86% Typical

- Rated Power:

- USB Port 1: 12 Watts Max. White port.

- USB Port 2: 18 Watts Max. Green port.

- Dimensions:

- Cable length:

- Weight:

- Approvals:

Screws for attachment e.g. onto a ProClip Mounting Platform

4 3x10 mm Phillips screws

Tilt swivel for easy adjustment

This product is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes.